WAX RELEASE AGENT- SPRAY

Bc-M release agent is a composition of waxes and silicones dispersed in a mixture of solvents. Bc-M is used to create antiadhesion coatings on molds when molding products from polymeric composite materials, polyurethane foams and molding polyurethanes . It is most often used as a release agent when molding flexible silicone molds at the boundary of silicone-silicone, silicone-model, silicone-molding (copies).

PROPERTIES:
Forms a polymer layer on the treated surface - an ultra-thin, durable, elastic film with high adhesion to the substrate materials - metal, gypsum, elastomers, glass, etc.

Does not form toxic compounds in air and waste water.
Efficient, reliable, easy to use.
Release form: aerosol.

BC-M GREASE APPLICATION AND OPERATING PECULIARITIES

Shake the cylinder thoroughly before use. Apply from a distance of 20-30 cm onto a clean, dry surface at a cylinder temperature not lower than + 15 °C in a well-ventilated area. Apply in 1-2 coats with an interval of 1-2 minutes.

Protect from direct sunlight and heating above + 50 °C.
Do not spray near open flames or hot objects.