Two-component moulding Silicone on Tin Catalyst PLS-505 (hardness 5-ShA)

PLS-505-1kg
17,99
Description
PLS-505 is a kind of room temperature vulcanized silicone rubber in condensation type. It’s generally named as two-part silicone rubber, Part A is a flowable liquid, part B is the curing agent or catalyst. It’s mainly used for mold making.

Application
PLS-505 silicone rubber is used for making molds of concrete stone, GRC, gypsum decoration, plaster ornaments,
fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle,
and similar products. PLS-505 Silicone rubber is a kind of soft silicone with good fluidity, It’s suitable for small size product with detailed pattern by pouring operation, especially popular for the manufacturer of detailed resin crafts, candle and soap crafts.

Characteristics
*An exceptional fluidity and good operability, easy to demold
*A kind of soft silicone
*Good tensile strength and tear strength
*Cure at room temperature
*Good flexibility
*Outstanding bubble releasing
*Good duplication times

Operation instructions
Step 1: prepare the original molds
Make sure your original molds are perfect. Fix it on a board. And fix the original mold on a board, then used four pieces of board to enclose the original molds.
Step 2: Take 100 G parts A and add 2G parts B and mix them evenly.
Notes: Mold making silicon rubber is a kind of flowing liquid, it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst. Pleas, follow the step strictly:
1.Weigh the two parts exactly by electronic weight.
If not, for example add two much catalyst, the operation time will be too fast to operate, which will cause inconvenience to operate.
2.Mix part A and part B evenly.
Otherwise, the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no further
steps will be available.
Step 4: Pouring casting or Brush operation
Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demold. Pourable silicone requires light viscosity which will be easy to flow smoothly and easy to de-air.
2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly.
Brush able silicone require high viscosity which won’t be easy to flow away and easy to brush.
3. We suggest to set the silicone mold for another 12 hours after demold before put into large production.

Technical Specifications:
https://drive.google.com/file/d/1hUDxIQfkOiKYohaH4wBJN8DohJmaigNS/view?usp=sharing

Вес: 1 кг