Transparent two-component epoxy resin in a 1:1 ratio. After curing, it forms a crystal-clear, hard, and smooth coating. Suitable for DIY products, resin furniture elements, jewelry, artistic works, and crystal paintings.
Description: E101 is a two-component epoxy resin (components A and B) that, after mixing and curing, forms a transparent, crystal-clear, and hard material. It features high transparency, an even and smooth surface, a wide range of applications, and ease of use. After curing, the coating has excellent wear resistance, impact resistance, and chemical resistance.
Technical specifications: - Mixing ratio: A:B = 1:1 by volume - Appearance: colorless transparent viscous liquid - Viscosity: A 5000–5500, B 4500–5000 - Density: A 1.05, B 0.95 - Drying time: surface ≤ 6 h, full ≤ 36 h - Heat resistance: 87 °C - Hardness: Shore D 82–84 - Dielectric strength: 22 kV/mm - Shrinkage: 0.1–0.3% - Pot life: 20 minutes at 25 °C (for 100 g of mixture) - Curing: 60 °C — 1 hour; at room temperature — 4–6 hours - Application conditions: temperature 5–35 °C, humidity 30–75%, good ventilation - Suitable substrates: wooden furniture, floors, photo frames, samples, accessories, etc. - Tool cleaning: solvent immediately after use - Shelf life: 12 months - Storage: dry, cool, well-ventilated place, away from heat and fire, keep the container tightly closed
Important: Before use, check component A for sediment and mix thoroughly. Store at 25 °C and humidity < 70%, protect from light. Component B easily absorbs moisture, so the jar must be tightly closed. After mixing, the resin gradually thickens and releases heat. The more mixed at one time, the faster the reaction and the shorter the working time. Work with goggles and personal protective equipment, ensure ventilation, avoid prolonged contact with skin.
!!! If after receiving the goods you discover any signs that the material may be of improper quality, you must immediately inform us and provide information about the batch of goods, storage, and usage conditions. In that case, we will be able to check the situation and, if necessary, arrange for the return of the material for inspection.
If the buyer discovered a problem with the material but continued to use it, independently changed the proportions or work technology, or did not contact the supplier for inspection and return of the goods, the supplier cannot be held responsible for possible consequences related to the further use of the material and the final product made from it.
We are always ready to help with recommendations on product use and to consider any questions related to the quality of the purchased material. [File content ends]