FAQ

Answers about silicone, epoxy and polyurethane resin, pigments, molds and accessories.

Two-component silicone

Platinum-type silicones are often 1:1 by weight, tin-type around 100:10. The exact ratio is always on the packaging.

Typically 20–100 casts, up to 200–300 with careful use. Fewer with resin (it "ages" silicone with heat), more with plaster or concrete.

Yes, the range includes food-safe silicone for chocolate, ice, and cookie molds.

Epoxy resin

The surface stops being tacky after 6–24 hours, it can be demolded after 24–48 hours (48–72 hours for deep pours), and reaches full hardness in 5–7 days.

Yes — you can walk on it after about 24 hours, full durability after 7 days.

UV resin is marked separately in the range — it doesn't yellow under prolonged sunlight.

Polyurethane resin

Polyurethane cures faster and is more flexible and impact-resistant, epoxy gives a harder, more transparent result.

Most products give 5–10 minutes, fast types as little as 30 seconds, slower ones up to 20 minutes.

Pigments

Usually 1–5% of the mixture's weight, depending on the desired color intensity.

Yes, pigments can be combined to get new shades.

Molds

Flexible silicone that withstands repeated use.

Some molds are made specifically for soap casting.

Accessories

Gloves, a mixing container, and for thicker layers — a thermometer to control proportions.

It removes air bubbles from resin or silicone before casting, improving the final result.

Subscribe to our newsletter
Get the latest Polistep news and be the first to know about new arrivals!
Wholesale of molding materials: silicones, resins, pigments and molds.

© 2026 Polistep.lv